Automatic External Defibrillator

Approx. Rs 75,000 / PieceGet Latest Price

• Kit Contents Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner’s manual, quick reference guide
• Waveform SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance
• Defibrillation peak current – Adult 32 A (150 J nominal) into a 50 ohm load
• Defibrillation peak current – Pediatric 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)
• Shock-to-Shock Cycle Time Typically less than 20 seconds between shocks in a series
• Quick Shock Able to deliver a shock after the end of a CPR interval, typically in eight seconds
• Voice Instructions Detailed voice messages guide responder through use of the defibrillator
• Sealing Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1
• Operating Temperature 0 – 50 °C (32 – 122 °F) °C (°F)
• Standby Temperature 0 – 43 °C (32 – 109 °F) °C (°F)
• Operating Humidity 0 to 95 % relative humidity (non-condensing)
• Standby Humidity 0 to 75 % relative humidity (non-condensing)
• Operating Altitude 0 to 4,500 m (0 to 15,000 ft) m (ft)
• Standby Altitude > 48 hours from 0 to 8,500 ft and <48 hours from 8,500 to 15,000 ft ft
• Shock/Drop Abuse Tolerance Withstands 1 meter drop to any edge, corner, or surface
• Vibration Meets EN1789 random and swept sine, road ambulance specification in operating and standby states
• EMI (Radiated/Immunity) Meets EN55011 Group 1 Level B Class B and EN61000-4-3
• Environmental/Physical Requirements

• Type 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
• Capacity Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
• Install-by Date Battery is labeled with an install-by date of at least five years from date of manufacture
• Standby Life Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses)

• Energy delivered Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load
• How Supplied Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solution
• Active Surface Area 85 cm² (13.2 in²) each cm² (in²)
• Cable Length Adult pads: 137 cm (54″); Infant/Child pads: 102 cm (40″) cm (inch)
• Use-by Date Cartridge is labeled with a use-by date of at least two years from date of manufacture
• Training pads (optional) Special pads put HeartStart OnSite into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins

Additional Information:

Approx. Rs 35,000 / PieceGet Latest Price

Details:

• Eight CPR/AED pre-configured scenarios
• CPR coaching feature
• Offers step-by-step instructions for performing CPR, including compression-to ventilation ratios and the length of each ventilation
• Simulates operation of the HeartStart Onsite or Home Defibrillators only

Additional Information:

Approx. Rs 10,000 / PieceGet Latest Price

AED trainer (Automatic External Defibrillator Trainer) EP-120C+ is designed to effectively train the emergency responder in the use of a clinical Automatic External Defibrillator (AED). This training unit provides a variety of pre-programmed scenarios to help responders become familiar with the defibrillator and allow them to demonstrate the basic skills necessary to use the defibrillator in an emergency.

Functions:

AED trainer EP-120C+ has the analog electric shock function. But it does not provide high voltage, to ensure the safety of the use of the process.

AED trainer EP-120C+ can be used with any kind of manikin. It simulate the real AED to analyse whether the electrode truly connect on the patients body.

AED trainer EP-120C+ preset 10 training modes, each mode is simulate the real situation of the heart sudden cessation events.

Features:

¿¿¿ It is completely compliant with the latest AHA guidelines, and pre-configured with 10 training scenarios that simulate realistic sudden cardiac arrest episodes.

¿¿¿ It is desinged with a replaceable plug-in card which has been uploaded the languages and scenarios. To insert the card, the selected language and scenarios are installed. Once the Guideliens are changed, customers only need a new plug-in card to update the scenarios.

¿¿¿ A metronome is added to the flashing lights when the unit is counting out the 2 minutes for CPR. The sound that prompts 100 comperssions per minute helps trainers to properly perform CPR.

¿¿¿ It can be used with the CPR Manikin; It can respond if the training pads connect firmly or not, can prompt whether the position of the electrode pads is ok.

¿¿¿ It includes the DC and AUDIO interfaces, the DC interface can connect the adapter, and the AUDIO OUT can connect the speaker, it's very helpful for instructors during teaching etc.

¿¿¿ It is bilingual. There are 16 languages for choice at present. Customized languages are available.

¿¿¿ It comes with Remote Control, which is very convenient for the teachers use in large classroom during teaching.

¿¿¿ There are FULLY and Semi auto scenarios modes for choice

Additional Information:

Approx. Rs 88,000 / PieceGet Latest Price

Bringing innovation to the treatment of cardiac arrest

Preconnected SMART Pads II

SMART Pads II can be used for both adults and children. They eliminate the expense of having to purchase different sets of pads for different patient types. SMART Pads II enable the FRx to keep pace with responders by adjusting to their actions.

 Infant/Child key

 Simply insert the Infant/Child key into the FRx to signal to the device that you’re treating an infant or a child. The defibrillator adjusts to provide special pads placement and CPR instructions. The pads icons also flash to show you the optimized pads placement, and the device reduces the shock energy to a level more appropriate for an infant or a child.

 Intuitive

 Clean design and clear voice instructions, including CPR coaching, are designed to help instill the confidence that’s needed when treating a person in cardiac arrest.

 Wireless Data Transfer

 Infrared data port for easy transmission to a Smartphone or PC running Event Review software, without cables or hardwire  compatibility issues

 Reliability backed by Philips

 Every HeartStart FRx goes through a 120-point quality test before it leaves the factory. The HeartStart FRx Defibrillator is powered by an easy-to-install, long-life (four-year) battery, so you know the device is charged and ready. The device’s automated daily, weekly, and monthly self-tests check pad readiness, and verify functionality and calibration of circuits and systems. With over 85 tests, the FRx is one of the most comprehensive self-testing devices on the market and is virtually maintenance-free. The blinking green “Ready” light on the defibrillator is your assurance that the device has passed its last self test and therefore is ready for use.

 Built on a platform of proven ease-of-use

 The HeartStart FRx Defibrillator was designed to be as easy to use as the HeartStart OnSite Defibrillator and shares many of its features, including CPR coaching an intuitive icon-driven operation. Small and lightweight – just 3.5 lbs/1.5 kg – the FRx is equipped to direct you through the resuscitation of a SCA victim.

The HeartStart FRx guides you through every step with clear, calm voice commands and descriptive visual  icons. The FRx even reminds you to call emergency medical services (EMS). Pressing the blue i-button activates HeartStart CPR Coaching for assistance with CPR. The flashing icons and the quick reference guide can be used to lead you through the defibrillation steps – even in situations where hearing voice instructions is a challenge. Once EMS arrives, hand-off is fast and easy because the FRx is compatible with advanced defibrillators like the HeartStart MRx. With HeartStart adapters, our pads can be plugged into devices from other manufacturers to ensure continuity of care.

Designed to be the easiest-to-own AED

Easy to set up

 The HeartStart FRx Ready-Pack configuration arrives to you complete and virtually ready to rescue. Just pull the green tab to initiate the FRx self-test, confirming its readiness for use, and put the device right into service. The FRx Ready-Pack comes with the FRx already inside its carry case, pads pre-connected, battery inserted, and a set of spare pads in place. Setup is easy, and you have the peace of mind of knowing the device is deployed correctly.

Establishing a successful program from the start

As the world leader in automated external defibrillators (AEDs), we’re also a leader in providing products and services designed to help you establish and maintain a successful AED program, including SMART Track AED program management, medical direction, access to training providers, and post-event support options.

Additional Information: